24v or 48v Low-Voltage Water Heating Element
These low-voltage water heating elements are for use as diversion loads for wind or hydroelectric systems. Use one or more of these heating elements with a charge controller designed for load diversion, such as the Xantrex C40 or C60, Morningstar TS-45 or TS-60 to turn your excess power into hot water. They fit most standard electric water heaters with screw-in elements. We have one model for 12- and 24-volt systems and another for higher power 24- and 48-volt systems. Each unit has two elements that can be wired in series or parallel or used individually, depending on voltage and desired amp draw. See table to determine what each element will draw at various charging voltages.1-inch male pipe threads. 2-year warranty.
If your water heater tank is designed for square flange elements, use one square flange adapter for each element. Please specify in options below.
