H-75 Air Heating Diversion Load
These resistive loads enclosed in vented aluminum boxes can be used in 12-, 24 and 48-volt diversion regulation systems. The aluminum box may get very hot in operation. It should be mounted on a nonflammable surface and should be at least 12" from any flammable material.
HL-100 is shipped as a 4-ohm resistor and can be reconfigured as a 1-, 0.5- or 0.25-ohm resistor by easily changing connections in the terminal block.
HL-75 is shipped as a 3-ohm resistor and can be reconfigured as a 0.75-ohm resistor by changing connections in the terminal block. See table below for diverted amps at various voltages. 2-year warranty.
