Enphase ECWP-01-20 20 Foot AC Interconnect Cable

Used for Installing AC Branch Circuit Junction Box

a. Mount the Enphase Adapter Plate at a suitable location on the PV racking
system (typically at the end of a row of modules).

b. Install an appropriate junction box with a 15A AC disconnect switch
(optional as required by local code requirements) to the adapter plate.

WARNING: Use electrical system components approved for wet locations
only.

c. Connect the open wire end of the Enphase AC interconnect cable into the
junction box using an appropriate gland or strain relief fitting.

d. Route the continuous Grounding Electrode Conductor (GEC) through the
AC branch circuit junction box. Check local code requirements for the
gauge of the GEC.