Fronius Wireless Card for Personal Display

Wireless card for use in a FRONIUS IG inverter with the FRONUIS IG Personal Display. One Wireless Card required per inverter in a system. This card only communicates with the FRONIUS IG Personal Display.

Only for use the FRONIUS IG Inverters shipped from Fronius after 1 December 2005 that are labeled with the words "Prepared for Use with the FROUNIUS IG Personal Display" located on the white cardboard shipping box near the module and serial number.

The Personal Display Card enables wireless data transmission to the FRONIUS IG Personal Display, just by being plugged in the inverter. The corresponding antenna can be mounted directly on or close to the inverter.

Technical Data
Dimensions (LWH): 5.5" x 4.0" x 1.0" / 140 x 100 x 26mm
Frequency range: 900 MHz (USA)
Power supply: via AC in the FRONIUS IG (240 VAC)
Operating temperature: -4 to 122F (-20 to 50C)
Protection class: NEMA 3R
Fronius Article-number: Retrofit: 4,240,008,Z

REQUIREMENTS
One Wireless Card per inverter. The Fronius IG Personal Display Card requires the Fronius IG Personal Display.