Wattsun AZ-225 Dual Axis Active Tracker (Up to 2040w)
Azimuth trackers automatically track the sun’s path by rotating the PV array around the pipe, providing greater stability for larger arrays. The corners do not protrude down towards the ground or stick up in the air to catch the wind. The bottom edge of the array always remains parallel to the ground and requires less ground clearance than tilt and roll trackers. Wattsun’s azimuth trackers provide nearly 270 degrees of rotational movement and can adjust from 5 to 75 degrees of elevation tilt.
AZ-225 Trackers
The AZ-225 gear-drive, azimuth tracker is for very large arrays. It can hold over 2 kW of solar modules. It is powered by a 24VDC motor running a heavy-duty ball bearing/ worm gear drive. It comes standard with the dual-axis option, enabling it to capture the maximum amount of solar energy. Mounts on a 8" or 10" schedule-40 steel pole. 10" poles will require an 8" section welded to top.
If your system voltage is not 24 VDC, you will need a Wattsun voltage converter. See option table below.
Wattsun model
Description of options
Item code
Price
12-24 15W for 12V battery
Required for 12 VDC AZ-125 Trackers
014-07118
$125
48-24 LVC
Steps down 48V from battery or 36V from array to 24 VDC for controller on AZ-125 Tracker
014-07116
$58
PPT-48-5R24
Steps down 48V from battery to 24V for controller. One required per two AZ-125 or one AZ-225
014-07117
$219
PPT-48-10R24
Steps down 48V from battery to 24V. Will power four AZ-125 Trackers or three AZ-225 Trackers
014-07119
$295
DR-4524 for pumping
Accepts 120-370 VDC input to power tracker controller from a high voltage water pumping array. Needs to be mounted in a raintight box if located outside. Also accepts 115 or 230 volt AC for one AZ-125 Tracker
014-07112
$84
IDEC PS5R-SF24
Accepts 115 or 230 VAC input to power tracker controller from the AC Grid when no backup battery bank is present. One required per two AZ-125 trackers or one AZ-225 Tracker. Needs to be mounted in a raintight box if located outside
014-07115
Dual-axis option
Add automatic elevation tracking to the AZ-125 Tracker. The DA Option is included in the Price of the AZ-225 Trackers
014-07018
$525
Manual controls
Exterior switches on the controller cover plate. Allows for the owner to turn off automatic tracking and then rotate the tracker east or west and/or up and down. Useful for dumping snow or to lay the tracker flat in extremely high winds
014-07030
Manual control kit
Field upgrade kit for Version 3 controllers. V3 controllers are “two piece” style and the sensor is independent of the main control box. Should be installed by an electrician or other certified personnel
014-07032
$150
Call us for pricing on other Wattsun trackers for different modules and module quantities.
Module
Module quantity
Wattsun drive
Dual axis
Steel pipe ID
Kyocera KC85T
8
AZ-125
optional
6"
014-07431
$3,385
12
014-07433
16
014-07435
24
AZ-225
included
8"
014-07436
$6,645
Kyocera KD135
014-07466
10
014-07467
15
014-07469
$6,250
014-07470
20
014-07471
$7,175
Sharp 165, 175,185
6
014-07653
014-07655
9
014-07656
014-07657
call
014-07658
SolarWorld SW175 mono
014-07754
014-07756
014-07758
014-07760
SunPower 210
014-07845
014-07846
014-07847
014-07848
AE-80/90HE
014-08001
014-08002
014-08004
28
014-08005
ES-A-200
014-07347
014-07349
014-07350
ES 190
014-07355
014-07357
014-07358
14
014-07359
Mitsubishi UE125
014-08171
014-08172
014-08173
014-08176
014-08177
014-08181
Mitsubishi UD185
014-08092
014-08094
014-08096
Kyocera 180
014-07455
014-07456
014-07457
014-07458
THIS ITEM SHIPS BY TRUCK FREIGHT WE WILL CONTACT YOU TO CONFIRM PRICE BEFORE PROCESSING ORDER.
