12-24 15W for 12V battery

Required for 12 VDC AZ-125 Trackers

014-07118

$125

48-24 LVC

Steps down 48V from battery or 36V from array to 24 VDC for controller on AZ-125 Tracker

014-07116

$58

PPT-48-5R24

Steps down 48V from battery to 24V for controller. One required per two AZ-125 or one AZ-225

014-07117

$219

PPT-48-10R24

Steps down 48V from battery to 24V. Will power four AZ-125 Trackers or three AZ-225 Trackers

014-07119

$295

DR-4524 for pumping

Accepts 120-370 VDC input to power tracker controller from a high voltage water pumping array. Needs to be mounted in a raintight box if located outside. Also accepts 115 or 230 volt AC for one AZ-125 Tracker

014-07112

$84

IDEC PS5R-SF24

Accepts 115 or 230 VAC input to power tracker controller from the AC Grid when no backup battery bank is present. One required per two AZ-125 trackers or one AZ-225 Tracker. Needs to be mounted in a raintight box if located outside

014-07115

$84

Dual-axis option

Add automatic elevation tracking to the AZ-125 Tracker. The DA Option is included in the Price of the
AZ-225 Trackers

014-07018

$525

Manual controls

Exterior switches on the controller cover plate. Allows for the owner to turn off automatic tracking and then rotate the tracker east or west and/or up and down. Useful for dumping snow or to lay the tracker flat in extremely high winds

014-07030

$125

Manual control kit

Field upgrade kit for Version 3 controllers. V3 controllers are “two piece” style and the sensor is independent of the main control box. Should be installed by an electrician or other certified personnel

014-07032

$150