Shurflo 9300 Submersible Pump
Use this lightweight submersible pump for livestock, irrigation or remote home application with low water requirements. The 9300 is a positive displacement diaphragm type pump with very high efficiency, but a much shorter life than centrifugal or helical rotor pumps. Diaphragm should be replaced every two to four years, depending on pumping volume.
The SHURflo 9300 can be operated on a 12- or 24-volt battery, or, with the use of one of the SHURflo Pump Controls, directly on a PV array. The pump can lift 1.3 gpm to 230 feet and can pump nearly 2 gpm from very shallow wells. It measures only 3.75" diameter x 12" long. Performance on a 12-volt battery will be less than half the flow on the accompanying table. 1-year warranty.
The 902-200 controller comes in an outdoor enclosure with water level sensors and sensor wire. It can be operated from a 12V or 24V array. Water sensors hang in the well and are used to prevent dry running in very low yield wells.
The 902-100 control must be mounted in a dry location and used with a 24V array.
-
|
Array Direct Performance (24V array)
|
|
Vertical lift
|
Minimum solar array size
|
Flow rate (gpm)
|
Amps @ 30V
|
|
20
|
2 x 32 watts
|
1.95
|
1.5
|
|
40
|
2 x 32 watts
|
1.90
|
1.7
|
|
60
|
2 x 50 watts
|
1.81
|
2.1
|
|
80
|
2 x 50 watts
|
1.76
|
2.4
|
|
100
|
2 x 50 watts
|
1.71
|
2.6
|
|
120
|
2 x 50 watts
|
1.68
|
2.8
|
|
140
|
2 x 80 watts
|
1.65
|
3.1
|
|
160
|
2 x 80 watts
|
1.63
|
3.3
|
|
180
|
2 x 80 watts
|
1.55
|
3.6
|
|
200
|
2 x 80 watts
|
1.52
|
3.8
|
|
230
|
2 x 80 watts
|
1.36
|
4.1
|
|
